Polyaspartic Acid (Sodium Salt)
As a water-soluble polymer, polyaspartic acid (sodium salt) is a biodegradable environmentally friendly water treatment chemical, as well as a corrosion and scale inhibitor. It can be used as an intensifier for absorbing nutrients in agriculture.
- Polyaspartic Acid (Potassium Salt)
Polyaspartic acid (potassium salt) can absorb and accumulate a variety of soil nutrients, balance the absorption of crops, and improve the fertilizer efficiency. It can also restore soil vitality, break down soil crusts, reduce soil-borne diseases and improve the water and fertilizer storage capacity of soil. In addition, it can reduce environmental pollution caused by the excessive use of chemical fertilizers.
- Polyaspartic Acid (Intermediate)
Polyaspartic acid (intermediate) is a biodegradable environmentally friendly water treatment chemical, as well as a corrosion and scale inhibitor. It can be used as an intensifier for absorbing nutrients in agriculture.
- Polyepoxysuccinic Acid (PESA)
Polyepoxysuccinic acid (PESA) is a phosphor and nitrogen free, environmentally friendly and multi-component scale and corrosion inhibitor. It has good scale inhibition and dispersion functions for calcium carbonate, calcium sulfate, barium sulfate, calcium fluoride and silica scale in water, and is more effective than the commonly used organophosphorus inhibitors.
- Hydrolyzed Polymaleic Anhydride (HPMA)
Hydrolyzed polymaleic anhydride (HPMA) is an organic fatty acid polymer, easily soluble in water, and has high chemical and thermal stability. It has good scale inhibition against carbonates and phosphates, and the effective time is up to 100 hours. It can be used together with the dehydration demulsifier for crude oil.
- Poly Ferric Sulfate (PFS)
Poly ferric sulfate is a new high efficiency inorganic polymer flocculant. Its flocculation is strong, its chemical nature stable, settling velocity high, and is applicable over a wide range of pH values, making it widely used in drinking water, industrial water, industrial wastewater, urban sewage purification treatment.
- Polyaluminum Ferric Chloride (PAFC)
Polyaluminum ferric chloride (PAFC) is an inorganic polymer. It combines the advantages of aluminum and ferric flocculants for a variety of temperature of raw water, making it an ideal agent to deal with raw water with more serious organic pollution, or raw water with low temperature. Therefore, it is widely used in drinking water, industrial water and industrial wastewater treatment.
- Polyaluminum Chloride
Polyaluminum chloride is an efficient low-power, inexpensive, non-toxic inorganic polymer. It is applicable to a wider range of pH value, larger flocculation kernel, faster settling velocity, which is widely used in drinking water, sewage as well as pharmaceutical, oil refining, oil exploration, printing, dyeing, textile and other industries for wastewater treatment.
- Decolorizing Flocculant
Decolorizing flocculant is a new type of cationic polymer guanidine polymer . It has both flocculation and sedimentation effects, and can effectively remove a variety of reactive, acidic, or unstable fuels and fuel intermediates. It is mainly used in textile, printing and dyeing, ink, paper and pharmaceutical wastewater treatment.
- Degreasing Flocculant
Degreasing flocculant is a new type of high-molecular compound. It has a special polymeric form and stronger cohesion, adsorption, sedimentation properties. It can treat the waste water with high oil content and greatly remove SS, COD, BOD, chroma, and microbes in water. It is widely used in steel, oil refining, oil field, other waste water and industrial water treatment.
- RO Membrane Biocide LRA 301
RO membrane biocide LRA 301 is a broad-spectrum biological inhibitor which can provide rapid sterilization when added with a low dosage. It is applied to all aromatic polyamide, polysulfone and cellulose acetate membranes.
- RO Membrane Biocide LRA 302
RO membrane biocide LRA 302 is a non-oxide bactericide and is highly effective in reducing bacterial growth. It is mainly used to producing drinking water in reverse osmosis membrane systems polluted by biological substances.
- RO Membrane Antiscalant LRA 201
RO membrane antiscalant LRA 201 is a high performance antiscalant and dispersant, especially applicable for feed water with high barium and strontium content and for RO system where barium sulfate and strontium sulfate scales are badly deposited. It can effectively inhibit scales within a wide concentration range of scale deposits.
- RO Membrane Antiscalant LRA 203
RO membrane antiscalant LRA 203 is a universal antiscalant and dispersant applied to reverse osmosis system. It is especially effective in controlling the deposition of inorganic salt scales on the membrane surface. It is compatible with all major reverse osmosis membranes.
- RO Membrane Antiscalant LRA 202
RO membrane antiscalant LRA 202 is a high performance antiscalant and dispersant, especially applicable for water with high metal oxides, silicon, and salts that easily cause scaling. It has high scale inhibition performance and will not form insoluble polymers with the residual flocculant or silicon compounds rich in aluminum and iron.
- RO Membrane Cleaner LRA 601
RO membrane cleaner LRA 601 is a cleaning agent specially designed for the removal of oil, organic substances, and biological mucous membranes. It is a liquid formulation with high pH value. It is applied to all aromatic polyamide and acetate membranes.
- RO Membrane Cleaner LRA 602
RO membrane cleaner LRA 602 is a liquid formulation with low pH value. It can be used to remove metal hydroxides, calcium carbonates and other types of scales. It is applied to all aromatic polyamide membranes.